Roberts MP-43 Manuál s instrukcemi stáhnout pdf (Strana 47)

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Press and hold the Menu button

so that the display shows "Set

Brightness" on the lower line of the text display.

2. Press and release the Tuning Up or Down buttons until the display

shows "System reset".

3. Press and release the Select button. The display will show "Press

SELECT to reset".

4. Press and release the Select button again to conﬁrm the reset

operation.

5. After a system reset, all radio station presets will be set to empty.

Alarms will be cancelled, audio equaliser, display brightness and

touch panel settings will have been set to their default values. The

clock will be reset and the unit will behave as when ﬁrst switched on

(see page 9).

In case of malfunction due to electrostatic discharge, reset the product

using the above procedure. In some circumstances it may be necessary

to disconnect and then reconnect the mains power in order to resume

normal operation.

If a problem persists our technical staff would be pleased to help offer

any assistance on operating the radio. Our technical helpline number

is 020 8758 0338.

3,4

Audio and Setup .

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

Žádné komentáře

Roberts MP-43 Manuál s instrukcemi Strana 47