Roberts STREAM 83I Manuál s instrukcemi stáhnout pdf (Strana 95)

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Network proﬁ les

Each time that you connect your radio to a WiFi network, the radio will

store the details of that connection (SSID, security key, DHCP/IP address

settings) as a proﬁ le. Up to four such proﬁ les are stored in the sound system

so that if the unit is used in multiple locations there is no need to enter the

network settings when returning to a location previously visited.

The sound system stores the four most recent proﬁ les in memory identiﬁ ed

by their SSID. Normally the sound system will attempt to connect to one

of the stored proﬁ les and only if it is unable to do so will you need to use

the Network Wizard (see page 15).

In the event that you visit a location only once you may wish to delete the

proﬁ le for the network in that location to avoid losing other proﬁ les.

1. Access the menu for the current mode by pressing the Menu button.

Rotate the Tuning/Select control until 'System settings' is highlighted

on the display. Press the control to enter the System Settings menu.

2. Rotate the Tuning/Select control until 'Network' is highlighted on the

display. Press the control to enter the Network Settings menu.

3. Rotate the Tuning/Select control until 'Network proﬁ le' is highlighted

on the display. Press the control to see the stored proﬁ les. The proﬁ le

which is currently in use (if any) is marked with an asterisk.

4. To remove a proﬁ le from memory, rotate the Tuning/Select control to

highlight the proﬁ le to be deleted and then press the control.

5. The radio will offer a 'YES' or 'NO' selection. Rotate the Tuning/Select

control to select 'YES' and then press the control. The selected proﬁ le

will be deleted.

Note that it is not possible to delete a proﬁ le which is currently in use.

1-5

Information

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 107 108

Terry Molloy 14 Mar 2025 | 02:51:32

None

Roberts STREAM 83I Manuál s instrukcemi Strana 95